Punch Press Gcode

Hi everybody,
I almost finished retrofitting a Turret punch press but I have a problem with it's gcode.
Example of the gcode I use now :
G01 X500 Y500
M64 P01
M66 P01 L3
M65 P01
The above Mcodes send the punch order to classic ladder and return the feed back to go to the next line of code.

how can I reprogram the G01 to include the whole order because it's not reasonable for the operator to write all of these codes or even copy and paste it.

I don't think that it is possible to re-map the G01 command (which in cases like this is somewhat unfortunate)

linuxcnc.org/docs/2.7/html/remap/remap.h...remap:existing-codes

If you can use something other than G1 then the task is relatively easy.

Here is a video of one in action running Linuxcnc

There are links on the description, but not much info.

I thought i saw him on this forum, and he was
forum.linuxcnc.org/show-your-stuff/31759...n-360-lathe-retrofit

All his posts
www.google.com/#q=HalaszAttila+site:linuxcnc.org

Thanks andypugh
It's not necessary to use G01, Any available linear motion code will be good.
But I can't get how to do remapping
I need help to remap any available linear motion gcode with my Mcodes.

Thanks in advance.

tommylight wrote: Here is a video of one in action running Linuxcnc

There are links on the description, but not much info.

Thanks tommylight
It's the same machine I work on
Trumph TC180 Turret punch

I will upload a video for it once I finish it lb ☺️

AElmasry wrote: But I can't get how to do remapping

Have a look at the minimal section,
linuxcnc.org/docs/2.7/html/remap/remap.h...s_including_tt_m6_tt

You need to add a line to the INI file to say what the new G-code is, and then need to create a G-code file containing a subroutine of the same name.

I tried the following :
In ini file [RS274NGC] section
Remap=G11 argspec=xy ngc=G11

I made a file in nc_files G11. ngc contain the following :
O<G11> sub
G1
M64 P1
M66 P0 L3 Q100
M64 P1
O<G11> endsub

I got unknown g code when executed G11.

I tried it on m code M11
O<M11> sub
M64 P1
M66 P0 L3 Q100
M64 P1
O<M11> endsub
I got EOF <path if my ngc file>
Seeking o-word: o<m11> fromline: 0

I tried to put the above subroutine inside my ngc file but the program stop at M11 line


Any idea how to do the remapping in my case?

Try "REMAP" instead?

andypugh wrote: Try "REMAP" instead?

The same result