Difficulty in configuring WHB04B-4

Hello everyone,

Can i seek a help for configuring this hand wheel ?
I am fine if not all the functions are working, i just want co ordinate display and Jog Axis and Speed Selector with handwheel.


If any leads in 2.7.14 version ?
i tried to install as per this wiki link wiki.linuxcnc.org/cgi-bin/wiki.pl?Using_...Wireless_MPG_Pendant

i am not able to install this two components, throwing invalid IP address in terminal.


Thanks,
Ankit

This is ss of error when i try to install "sudo apt-get install libusb-1.0-0-dev"

You need to run
sudo apt-get update
before installing as it looks like the sources list has not been updated and the old servers are not in use any more.

I Tried that but always failed with above error. i tried in diffrent system and fresh installation also but failed. Showing above IP error.

The Wheezy repositories have all moved.

In your repository settings change http.debian.net to archive.debian.org and see if that helps.

Brilliant as always Andypugh it worked for this "libusb-1.0-0-dev" problem .... tonns of thanks

Regards,
Ankit