- Posts: 544
- Thank you received: 0
RTCP OS Linuxcncversion?
6 years 9 months ago #155343
by bbsr_5a
RTCP OS Linuxcncversion? was created by bbsr_5a
as in Topic
for a 5-Axis RTCP //Trivial workes fine in most cases setups
1.What OS is recomended 64bit 32bit
2.Does it work on Stretch Mint19
3.Do i need Master to be compiled or only Buildbot 2.9Master will do it
for a 5-Axis RTCP //Trivial workes fine in most cases setups
1.What OS is recomended 64bit 32bit
2.Does it work on Stretch Mint19
3.Do i need Master to be compiled or only Buildbot 2.9Master will do it
Please Log in to join the conversation.
- tommylight
-
- Away
- Administrator
-
Less
More
- Posts: 22012
- Thank you received: 4
6 years 9 months ago #155351
by tommylight
Replied by tommylight on topic RTCP OS Linuxcncversion?
1 Linux Mint
2 yes it works on Debian Stretch and Linux Mint 19.n , and yes the stretch version of buildbot works on Mint 19.n.
3 Buildbot 2.9 is the same the compiled version, give or take a day of differences.
2 yes it works on Debian Stretch and Linux Mint 19.n , and yes the stretch version of buildbot works on Mint 19.n.
3 Buildbot 2.9 is the same the compiled version, give or take a day of differences.
Please Log in to join the conversation.
6 years 9 months ago #155511
by bbsr_5a
Replied by bbsr_5a on topic RTCP OS Linuxcncversion?
Thank you very match
i will go with the non-official stretch r13 and update to 2,9 buildbot
i will go with the non-official stretch r13 and update to 2,9 buildbot
Please Log in to join the conversation.
Time to create page: 0.083 seconds
