External Step Generator Project

More
5 years 6 months ago #204387 by Deotti
External Step Generator Project was created by Deotti
I started a project with esp32 to external step generator and encoder interface and io pins, its seems promissor project but i'm not expert in programation if someone want help to improve this will wellcome!
This video show it working (
)

Please Log in to join the conversation.

More
5 years 6 months ago #204390 by cmorley
Replied by cmorley on topic External Step Generator Project
Are you using preempt kernel or RTAI kernel?

Please Log in to join the conversation.

More
5 years 6 months ago #204392 by Deotti
Replied by Deotti on topic External Step Generator Project
preempt

Please Log in to join the conversation.

More
5 years 6 months ago #204569 by andypugh
Replied by andypugh on topic External Step Generator Project
What us your link between the ESP32 and LinuxCNC?

Please Log in to join the conversation.

More
5 years 6 months ago #204890 by Deotti
Replied by Deotti on topic External Step Generator Project
i am using ethernet with udp protocol and a wiznet w5500 board to comunicate at esp32 side.

Please Log in to join the conversation.

More
5 years 6 months ago #204894 by andypugh
Replied by andypugh on topic External Step Generator Project
Sounds interesting.
But, personally, I already have too many interesting projects.

Please Log in to join the conversation.

Time to create page: 0.096 seconds
Powered by Kunena Forum