Spindle Step/Dir servo ramp down before stop on M stop command.

(see previous message..)  it is to do this ... attached the file cn test:

There has to be a space between install and the file path.
you have
--install/some/folder/somewhere
needs to be
--install /some/folder/somewhere
notice the space after install.

good evening Tommyliht, I had written this:
"sudo halcompile --install/home/prv1224ss/linuxcnc/configs/ma-machine_xyza_en_c/caxis.comp"
Could you tell me what is wrong? Thanks again

jpg wrote:

good evening Tommyliht, I had written this:
"sudo halcompile --install/home/prv1224ss/linuxcnc/configs/ma-machine_xyza_en_c/caxis.comp"
Could you tell me what is wrong? Thanks again

Should be
"sudo halcompile --install /home/prv1224ss/linuxcnc/configs/ma-machine_xyza_en_c/caxis.comp"
notice the space here ----^

It's been a long time. Is this anything to do with the thread title any more?