is_callable(__init__) = FALSE

More
4 years 2 months ago #250782 by LearningLinuxCNC
is_callable(__init__) = FALSE was created by LearningLinuxCNC
I get the following error when running linuxcnc after adding in some remap code.
Code:
/home/sboperator/linuxcnc/configs/Holloway_Sprayball_Machine/Holloway_Sprayball_Machine_QT.ini:64: executing 'import sys sys.path.append("/home/sboperator/linuxcnc/configs/Holloway_Sprayball_Machine/Remap/")' PythonPlugin: Python  '2.7.16 (default, Oct 10 2019, 22:02:15) [GCC 8.3.0]' is_callable(__init__) = FALSE

is this an issue? It does not seem to be affecting anything but it pops up in the terminal as I am running various commands.

Please Log in to join the conversation.

More
4 years 1 month ago #250903 by andypugh
Replied by andypugh on topic is_callable(__init__) = FALSE
It doesn't look like an issue, as there is not word like "error" to indicate a problem.

I assume that you haven't increased your debug level? If not perhaps some test code has been left in somewhere.

There are only a few sys.path.append() in the code:

github.com/LinuxCNC/linuxcnc/search?q=sys.path.append

Please Log in to join the conversation.

Time to create page: 0.152 seconds
Powered by Kunena Forum