Setting motion.analog-out-xx to 0 when starting the machine

More
3 years 8 months ago #263886 by MaHa
Replied by MaHa on topic Setting motion.analog-out-xx to 0 when starting the machine
I copy/paste to a file from post #263505, and temporarily replaced the regular on_abort.ngc. Tested with axis F1,F2,ESC key and also setp the related halui.nnn pins to true/false, without error.

Please Log in to join the conversation.

More
3 years 8 months ago #263909 by andypugh
Replied by andypugh on topic Setting motion.analog-out-xx to 0 when starting the machine
Possibly a stray control character has crept in to the OP's NGC file then.
(Has it been edited on a Windows PC, or been near a word processor?)

Please Log in to join the conversation.

More
3 years 8 months ago #264059 by HiSH
Replied by HiSH on topic Setting motion.analog-out-xx to 0 when starting the machine
No, the on_abort.ngc-file is completely created and edited in Linux with geany.

Please Log in to join the conversation.

More
3 years 8 months ago #264175 by andypugh
Replied by andypugh on topic Setting motion.analog-out-xx to 0 when starting the machine
Have you got any further with this?

Please Log in to join the conversation.

More
3 years 8 months ago #264415 by HiSH
Replied by HiSH on topic Setting motion.analog-out-xx to 0 when starting the machine
In the moment, the error didn't appear, but i don't know why.
I think, i will get him again, when it's unpractical for me.
Are there some points, i can check, when there error appears again?

Please Log in to join the conversation.

Time to create page: 0.130 seconds
Powered by Kunena Forum