Mesa 7i96s PWM outputs

COFHAL
Offline
Platinum Member

2 years 7 months ago #296281 by COFHAL

Replied by COFHAL on topic Mesa 7i96s PWM outputs

Yes, i need indexs.

Please Log in to join the conversation.

PCW
Away
Platinum Member

2 years 7 months ago #296282 by PCW

Replied by PCW on topic Mesa 7i96s PWM outputs

You can get 3 encoders, 3PWM/DIR and 2 enables on P1
(you could combine 2 7I33 enables to have all 3)

Please Log in to join the conversation.

COFHAL
Offline
Platinum Member

2 years 7 months ago #296313 by COFHAL

Replied by COFHAL on topic Mesa 7i96s PWM outputs

PCW wrote:
You can get 3 encoders, 3PWM/DIR and 2 enables on P1
(you could combine 2 7I33 enables to have all 3)But for this combination I need a custom firmware.

Please Log in to join the conversation.

PCW
Away
Platinum Member

2 years 7 months ago #296327 by PCW

Replied by PCW on topic Mesa 7i96s PWM outputs

7I96 firmware to support 3 channels of a 7I33 on the P1
expansion connector. Wiring is as close to 1-1 as possible

Attachment not found

Please Log in to join the conversation.

COFHAL
Offline
Platinum Member

2 years 7 months ago #296359 by COFHAL

Replied by COFHAL on topic Mesa 7i96s PWM outputs

Thank you for you support.

Please Log in to join the conversation.

Time to create page: 0.046 seconds