How to achieve tilt-plane processing instead of RTCP

Is there a G68.2 instruction similar to the FANUC?

G68.2 (Tilted Work Plane) is not implemented by default but I have made a python remap implementation.

Have a look in this simulation configuration here:
forum.linuxcnc.org/show-your-stuff/49103...-head?start=0#271334

The TWP implementation requires the 'remap.py' the 'twp_helper.comp' and the custom kinematic component.
Have a look at the Documentation in the zipped up config folder.

Thank you very much for answering the questions that have plagued me for a long time.