How to configure 5 axis Spindle tilting/rotary machine

woai312742
Topic Author
Offline
New Member

2 years 5 months ago #301195 by woai312742

How to configure 5 axis Spindle tilting/rotary machine was created by woai312742

The machine looks like the picture

Do I want to customize the kinematics?

Please Log in to join the conversation.

Aciera
Offline
Administrator

2 years 5 months ago #301199 by Aciera

Replied by Aciera on topic How to configure 5 axis Spindle tilting/rotary machine

have a look at the xyzbca kinematics in the double sim config attached here:
forum.linuxcnc.org/show-your-stuff/49103...-head?start=0#271334

Set the nutation angle to 90° and adjust the pivot lengths. Further documentation can be found in the README file and DOCUMENTATION folder in the zipped up config.

Please Log in to join the conversation.

woai312742
Topic Author
Offline
New Member

2 years 5 months ago #301206 by woai312742

Replied by woai312742 on topic How to configure 5 axis Spindle tilting/rotary machine

Thank you very much.

Please Log in to join the conversation.

Time to create page: 1.563 seconds