On the lathe, I decided to use macro commands when changing tools: Т№M6 G43.
I have 10 instruments in total. I decided to bind these commands to xhc-hb04. I came across the fact that the macro3 macro4 macro8 buttons do not work, although the commands were written in the ini file. In the hal file responsible for the operation of mpg, I saw that these buttons are reserved.
Is it possible to somehow remove/exclude the default spindle control or change the hal file so that macros become active (Fn+macro3/macro4/macro8)?
p.s.
translated and voiced by Google translator
