iov2

More
2 years 2 weeks ago #312107 by Serg452
iov2 was created by Serg452
No iov2 pins are available in the latest update, everything works when rolling back to release 2.9.3. What's the reason?

Please Log in to join the conversation.

More
2 years 2 weeks ago #312108 by tommylight
Replied by tommylight on topic iov2
?

Please Log in to join the conversation.

More
2 years 2 weeks ago #312110 by Serg452
Replied by Serg452 on topic iov2
 

Attachment not found



 

Attachment not found

Please Log in to join the conversation.

More
2 years 2 weeks ago #312129 by Aciera
Replied by Aciera on topic iov2
As I understand it, 'iocontrolv2' has been removed in master:
github.com/LinuxCNC/linuxcnc/pull/2497

Using a remap seems to be the suggested alternative.

Please Log in to join the conversation.

More
2 years 2 weeks ago #312207 by Serg452
Replied by Serg452 on topic iov2
linuxcnc.org/docs/html/
If someone updates the text of the documentation, then in 2.9.3-2099 everything is unchanged in iocontrol-v2
linuxcnc.org/docs/html/config/iov2.html

Please Log in to join the conversation.

Time to create page: 0.088 seconds
Powered by Kunena Forum