c++ compiling error

I receive these error when try to use my app written in c++ .... with c++14 linuxmint 22 and Lcnc2.10 ....

seems there are something not find (library or what else ....) but not understand what is it!! Lcnc is regular install and work .... so not understand what library need after these:

LIBS+=  -Iinclude -I/usr/lib/linuxcnc/canterp.so
LIBS += -L/usr/lib -lnml -llinuxcnchal -llinuxcnc -llinuxcncini -DULAPI -lposemath -Isrc/emc/rs274ngc


regards
 

I see now in my deb installation there is not hal_priv.h file ... is possible? I try to fin it on /usr or /share or other system folder witrh no result ... these can be? In github is present ... why not in my installation?

regards

You don't get all the source files with a deb installation, if you want everything then you should clone the git tree and build linuxcnc on your local machine (aka RIP installation)

I have the rip install too .... same as in the old machine .... I have the same situation .... these last consideration is only erroneus. I'm little bit tired ....

Hi Bkt,

Can i assist you to compile your project?
If you pass me link or source to compile, i will try it for you.

Greetings Grotius.

 

Hi Grotius

I try to upload on my github .... honestly first time for me. when done I advice you. real thanks
Yesterday I try to load your old repo .... maybe I forgot somethings ... but nothings ... seems equal or quite equal ..... I read again and again my old ssd without find anythigs .... but I'm tired in these period ...so maybe somethings is looses .... or for sure is looses .... if not all works.

regards

these means sometings go wrong during creation of .deb packages?? or c++14 not able to find .h necessary heather?
Because iniAxis is linking to liblinuxnc.a but emcAxis..... is used as c++ code (correctly) some trouble with mixing c and c++ code? .....

Hi,

Do you have a link for me? Where to find you on github?
 

Grotius wrote:

Hi,

Do you have a link for me? Where to find you on github?

 

for now these link .... github.com/bkt-it/QT6-halwidget .... so you can check .... my repo is nothing of special and anonimous .... not used to work on and for me commit and so sound like somethings of misterious .... any how today is my free day project so I try to upload a reduced version of my project without many features .... so we can concentrate on lcnc part.
 

Hi,

Attached .pro file compiles ok. Remove .txt extension.
Did 2 modifications.

It also compiles and runs when i start a new empty gui project and link to your plugin.
see cmakeLists.txt