How to activate the Z axis with the 7i77 and configure the THCAD02 encoder?

More
2 years 1 week ago #312967 by programador
How to activate the Z axis with the 7i77 and configure the THCAD02 encoder? was created by programador
Good afternoon everyone

Can you please help me with how to configure the Z axis drive and recognize the THCAD2 as an encoder? I have tried several times without success.

 

Attachment not found



When trying to move the axis, an error appears calculating the movement of the Z axis.

 

Attachment not found



This is the INI file type configuration

 

Attachment not found



this is the HAL type file configuration

Please, can someone guide me?

INI and HAl files attached


 

Attachment not found



 

Attachment not found



 

Please Log in to join the conversation.

More
1 year 11 months ago #313657 by tommylight
Replied by tommylight on topic How to activate the Z axis with the 7i77 and configure the THCAD02 encoder?
Same subject has been answered on 2 other topics with similar tittle.

Please Log in to join the conversation.

Time to create page: 0.694 seconds
Powered by Kunena Forum