Path preview cluttered with tool change and tool setter position.

I have a probe and tool setter and have set up my M6 remap according to  forum.linuxcnc.org/forum/10-advanced-con...h-off?start=30#48235 .

Is it possible to get rid of the indicated travel moves to tool change and tool setter positions in the path preview window? As well as the strange indicated travel to 0;0, during operation the spindle is not moving to this position.

The indicated moves messes with the work envelope, making setup harder. Also pressing the "Z" button in qtdragon now zooms out to like the whole machine, instead of the actual work envelope. 

If anyone is interested, here is my config:  github.com/hmunktell/printNC/tree/probe

You can exclude the tool change gcode from the preview interpreter by checking 'task':

Ooooh, wow! That worked like a charm Thank you so much!