duplicate component name "usergenserkins"

More
1 year 6 months ago #326363 by heaven
When i try run usergenserkins in terminal by typing genserkins to test something, i got this error:
HAL: ERROR: duplicate component name 'usergenserkins'
HAL: ERROR: component -22 not found
Segmentation fault
I'm running linuxcnc 2.9.4

Please Log in to join the conversation.

More
1 year 6 months ago #326370 by Aciera

When i try run usergenserkins in terminal by typing genserkins to test something


I'm not exactly sure what that means but looking at this note at the beginning of 'ugenserkins.c' makes me think that you might be trying to use something that is likely no longer working:

Code:
/******************************************************************** * !!! Declining usage * !!! This userspace program was been separated from the original * !!! genserkins.c as part of refactoring kinematics for * !!! switchkins support. The userspace program has not been * !!! updated since 2009 (commit 1939285758) and correct * !!! functioning in its current state is doubtful. * * Description: ugenserkins.c * Test program (originally part of genserkins.c) * License GPL Version 2 ********************************************************************/

Please Log in to join the conversation.

More
1 year 6 months ago #326380 by heaven
Yes, it is. In lcnc 2.8 i can run it by typing "genserkins" (not halrun) in terminal, but from 2.9 it seperated to ugenserkins.c and no longer work. I'm trying to add base and tool transform for this module.

Please Log in to join the conversation.

More
1 year 6 months ago #326382 by Aciera
Just tried on a locally built version of master, seems to kind of work:
 

Attachment not found

Please Log in to join the conversation.

More
1 year 6 months ago #326383 by heaven
I  just reseted my pc and it worked, weird  . Thanks anyway

Please Log in to join the conversation.

Time to create page: 0.087 seconds
Powered by Kunena Forum