freelancer needed to create a routine for ATC tool change (rackchange)

More
10 months 2 weeks ago #340069 by Masiwood123
Replied by Masiwood123 on topic freelancer needed to create a routine for ATC tool change (rackchange)
now the first three slots work as usual, if I select the fourth one when returning the tool to one of the first three I get this error

Attachment not found

Please Log in to join the conversation.

More
10 months 2 weeks ago #340070 by MaHa
Replied by MaHa on topic freelancer needed to create a routine for ATC tool change (rackchange)
Did you add this to the .ini file, the  line with y_gap ?


[TOOL_SLOT_DELTA]
X = 0
Y = -111
Z = 0
y_gap = -206

Please Log in to join the conversation.

More
10 months 2 weeks ago #340071 by Masiwood123
Replied by Masiwood123 on topic freelancer needed to create a routine for ATC tool change (rackchange)
yes exactly

Please Log in to join the conversation.

More
10 months 2 weeks ago #340073 by MaHa
Replied by MaHa on topic freelancer needed to create a routine for ATC tool change (rackchange)
I think the problem is, not using uppercase letter. This should work:

Y_GAP = -206

Please Log in to join the conversation.

More
10 months 2 weeks ago #340075 by Masiwood123
Replied by Masiwood123 on topic freelancer needed to create a routine for ATC tool change (rackchange)
now

Attachment not found

Please Log in to join the conversation.

More
10 months 2 weeks ago #340076 by MaHa
Replied by MaHa on topic freelancer needed to create a routine for ATC tool change (rackchange)
There is this bracket ']' to remove:


line 27
#<y_gap_o> = #<_ini[tool_slot_delta]y_gap>]


line 72
#<y_gap_i> = #<_ini[tool_slot_delta]y_gap>]

Please Log in to join the conversation.

More
10 months 2 weeks ago #340078 by Masiwood123
Replied by Masiwood123 on topic freelancer needed to create a routine for ATC tool change (rackchange)
WOW now it works without errors, thank you very much, I'm very happy... please leave an email, I would like to do something for the favor!

youtube.com/shorts/J1DJ8W4_v6Y?si=e8J3gdIzHKPtXllS

Please Log in to join the conversation.

Time to create page: 0.047 seconds
Powered by Kunena Forum