Kinematics

1 month 1 week ago #349731 by ianlowe

Kinematics was created by ianlowe

Are there any kinematics for a 5-axis machine with 6 motors (X, Y1, Y2, Z, A,

Ideally with gantry kins control for dual y-y and to include rotary control for the 4th and 5th axis.

Please Log in to join the conversation.

1 month 1 week ago #349733 by Aciera

Replied by Aciera on topic Kinematics

have a look at '5axiskins' (2 tool side rotations), for an example see configs/sim/axis/vismach/5axis/bridgemill

Please Log in to join the conversation.

Time to create page: 0.071 seconds