Linuxcnc not seeing limit switches

More
10 years 10 months ago #67108 by TarHeelTom
Replied by TarHeelTom on topic Linuxcnc not seeing limit switches
Tried to run "grep parport" last night and after two hours, grep had not yet found any replies, but had not given up.

Anyone know how to dorect grep to look in a particular area?

Thanks

Tom

Please Log in to join the conversation.

More
10 years 10 months ago #67111 by Todd Zuercher
Replied by Todd Zuercher on topic Linuxcnc not seeing limit switches
Copy and paste this whole line to a terminal prompt and press enter.
Code:
cat /proc/ioports | grep parport

Please Log in to join the conversation.

Time to create page: 0.096 seconds
Powered by Kunena Forum