Mikron WF 2/3 DCM

More
4 years 11 months ago #226154 by Mikron1207
Mikron WF 2/3 DCM was created by Mikron1207
I'm retrofitting a Mikron WF 2/3 DCM, does anyone have a circuit diagram for the Heidenhain TNC 145RT or 145 CR? Everything that is useful for the transmission control. Which communication protocol is used between the TNC 145 and the Mikron control? 

Attachment not found

 

Attachment not found

Please Log in to join the conversation.

More
4 years 10 months ago #228481 by tommylight
Replied by tommylight on topic Mikron WF 2/3 DCM
Are there supposed to be two of the same pictures ?
We would need the other picture with A20 in it.

Please Log in to join the conversation.

More
3 years 10 months ago #258263 by Vojta333
Replied by Vojta333 on topic Mikron WF 2/3 DCM
I have complete manual for Mikron WF 40 C (31,5-3150 RPM) and hire is the bitcode for speeds and for M03,M04,M05 codes

docs.google.com/spreadsheets/d/15ErQ2TpD...xoE/edit?usp=sharing

I have TNC 145C and Bit 1 is J2/2, Bit 2 is J2/3 ... Bit 8 is J2/9

Please Log in to join the conversation.

Time to create page: 0.074 seconds
Powered by Kunena Forum