Boxford 260 CMC 1989 mod

Getting this working again.
Poor Phil has been sitting still for 6 years.
I dont know why its named phil.

Its a "training machine from back when.
real solid. Looks skimpy, but it suprised me when i got to test run it.

 

Seems easy enough, the board has all the pins written on it, so wire a power supply, get an old PC with parallel port and install LinuxCNC from the downloads page, wire the Xclk and Xdir and the rest of Y and Z, test.

Yeah just showing off the machine.Im putting mesa card as replacement. Do you know if there is a retro look user interface. For the linuxcnc.
 

There are a lot of GUI's included with LinuxCNC, you can find them by starting it from the main menu in the config picker, most are under SIM folder and all those run without any hardware so you can run and test them as much as you like.

It's called "Phil" to rhyme with "Mill".
Maybe they also had a Dave the Lathe?

Where did you get it from? This has a vague feeling of hackspace humour.

Boxford have been making machine tools for a long time:
www.lathes.co.uk/boxford/index.html
And are still around today:
www.boxford.co.uk/cnc-machining-centres/

Yea phil rime i get it.
And we do have the mini lathe too.

Been at a school in norway.

Sitting still for 6 years.
Got it working again.
But need to add safety stuff like e stop limit sensor ect