GSK 980 MDI milling machine, I want to make my first program

More
1 year 5 months ago #327401 by MagMag5
GSK 980 MDI milling machine, I want to make my first program was created by MagMag5
I want to run my first drilling, countersinking, and threading program on my GSK 980 mdi milling machine. Upon starting it, tool 1 crashed 3 times.

The job I want to do is a steel bar measuring 1 inch wide (y-axis), 0.5 inches high (z-axis), and 90 cm long (x-axis). It has drilled holes, followed by countersinking, and ends with a thread for an M10 x 1.5 screw.

If anyone has an example that could help me correct what I've done, that would be a great help.

Please Log in to join the conversation.

More
1 year 5 months ago #327403 by Aciera
Replied by Aciera on topic GSK 980 MDI milling machine, I want to make my first program
Maybe you could post your gcode so we have something to go on.

Please Log in to join the conversation.

More
1 year 4 months ago #329762 by Kieran
Replied by Kieran on topic GSK 980 MDI milling machine, I want to make my first program
Heres a quick code thrown together out of Fusion drilling and countersinking a hole. Do some research on G code and how to setup your tool offsets and work offsets. hopefully it gives an idea of the G code structure for you.
Code:
% (1001) (T1 D=6.35 CR=0. TAPER=118DEG - ZMIN=-14.608 - DRILL) (T2 D=12.7 CR=0. TAPER=90DEG - ZMIN=-3.4 - COUNTERSINK) G90 G94 G17 G91.1 G21 G53 G0 Z0. (DRILL1) T1 M6 T2 S5000 M3 G17 G90 G94 G54 M8 G0 X80. Y-0.005 G43 Z111.6 H1 G0 Z101.6 G98 G83 X80. Y-0.005 Z-14.608 R5. Q1.587 F1000. G80 G0 Z111.6 M5 G53 G0 Z0. (DRILL1 3) M9 M1 T2 M6 T1 S5000 M3 G17 G90 G94 G54 M8 G0 X80. Y-0.005 G43 Z111.6 H2 G0 Z101.6 G81 X80. Y-0.005 Z-3.4 R5. F333.33 G80 G0 Z111.6 M5 M9 G53 G0 Z0. M30 %

Please Log in to join the conversation.

Time to create page: 0.214 seconds
Powered by Kunena Forum