configuring lathe problem stepconfig

Clive
You are using master if you have U or V in a stepconf config.
But I just pushed fixes to that problem.

Chris M

cmorley wrote: Clive
You are using master if you have U or V in a stepconf config.
But I just pushed fixes to that problem.

Chris M

Chris

I have never used the git and don't really understand the master. I had used the 2.6 hybrid cd iso and then updated from the apt get thing within Linux which seemed to bring it to 2.7 ish

But at least a bug was found. Thank you for your help. ..Clive


Edit as of the 3/4/15 I have redone an update and the u - v bug has been cleared

ArcEye wrote: This is a template so will cover whatever thread size
(ignore the M code, that is just a local one to set the pulley number for correcting the speed)

Code:

;; Threading with G76

I tried the posted code, but it complains about feed being a read-only variable. Changing the variable name fixed it, I guess some internal things changed in LinuxCNC since back then in 2015.