Lathe step config question

I'm in the process of converting a Grizzly G0602 to cnc and plan on using the hardware kit from BDtools. I want work with inch units in AXIS but his ball screws are metric with 5mm & 4mm leads on the Z and X axis.

Is this going to be a problem with me running the lathe in inch mode exclusively ?

Can I add anything in my ini file so that even though the lathe is configured in metric mode using step config, it will come up in inch mode on my axis screen and calculate everything in inch mode properly.

Thanks,
Dave

Davenc wrote: I'm in the process of converting a Grizzly G0602 to cnc and plan on using the hardware kit from BDtools. I want work with inch units in AXIS but his ball screws are metric with 5mm & 4mm leads on the Z and X axis.

Just use 5.08 TPI and 6.35 TPI

Thank you sir, a much easier way to do the same thing.