Plasma set up

Hi to all , i am about to set up a plasma torch to my cnc table,..how do i set the cnc software to run ir, eg trigger the torch..

i have a router table working fine but now need some help with setting the config to run a plasma torch..

thanks Ken

Tasmania , Australia.

vk7dy wrote: Hi to all , i am about to set up a plasma torch to my cnc table,..how do i set the cnc software to run ir, eg trigger the torch..

i have a router table working fine but now need some help with setting the config to run a plasma torch..

thanks Ken

Tasmania , Australia.

Have you seen this. linuxcnc.org/docs/2.8/html/plasma/plasmac-user-guide.html

and ;- linuxcnc.org/docs/2.8/html/plasma/plasma-cnc-primer.html