Forum Header

error setting limit switches

4 years 11 months ago #226332 by PhilipME

error setting limit switches was created by PhilipME

When I setup my machine, and use x-lmit (pin 11 in this case ), the machine will not start. Regardless of wiring.

Please Log in to join the conversation.

4 years 11 months ago #226335 by PhilipME

Replied by PhilipME on topic error setting limit switches (SOLVED)

Apology

I found the power supply to the out put pins was off

very stupid

Please Log in to join the conversation.

4 years 11 months ago #226336 by tommylight

Replied by tommylight on topic error setting limit switches

Check the invert box on the right side of the pin/pin name.

Please Log in to join the conversation.

4 years 11 months ago #226338 by PhilipME

Replied by PhilipME on topic error setting limit switches

very cool

when the machine reach the limit and trip, I hear music

Thanks

Please Log in to join the conversation.

Time to create page: 0.081 seconds