Forum Header

GMOCCAPY OPTION NOT SHOWING

rajsekhar
Topic Author
Offline
Elite Member

4 years 6 months ago #240326 by rajsekhar

GMOCCAPY OPTION NOT SHOWING was created by rajsekhar

I am running Linuxcnc 2.7.15, RTAI (3.4-9-rtai-686-pae) kernel to get better latency.

When using stepconfig wizard, the option for gmoccapy is not showing, only axis GUI is configured as configuration completed.

How to solve??

Please Log in to join the conversation.

cmorley
Offline
Platinum Member

4 years 6 months ago #240330 by cmorley

Replied by cmorley on topic GMOCCAPY OPTION NOT SHOWING

2.7 didn't have the Gmoccapy option in stepconf.

Please Log in to join the conversation.

HansU
Offline
Platinum Member

4 years 6 months ago #240339 by HansU

Replied by HansU on topic GMOCCAPY OPTION NOT SHOWING

What about setting

Code:

[DISPLAY]
DISPLAY = gmoccapy

in the INI file?

Please Log in to join the conversation.

rajsekhar
Topic Author
Offline
Elite Member

4 years 6 months ago #241703 by rajsekhar

Replied by rajsekhar on topic GMOCCAPY OPTION NOT SHOWING

I updated to 2.8 and Gmoccapy is working

Please Log in to join the conversation.

Time to create page: 0.082 seconds