I added this in my HAL-File:
Code:
net spindle-cmd-rpm <= spindle.0.speed-out
net spindle-cmd-rpm-abs <= spindle.0.speed-out-abs
net spindle-cmd-rps <= spindle.0.speed-out-rps
net spindle-cmd-rps-abs <= spindle.0.speed-out-rps-abs
net spindle-at-speed => spindle.0.at-speed
net spindle-on <= spindle.0.on
and changed an apparently wrong
net spindle-cw => parport.0.pin-09-out
into
net spindle-on => parport.0.pin-09-out
and now my spindle starts and everything works find, thank you Sir!
Ciao
Sebastian
