Linuxcnc terminated with an error !!

More
10 years 8 months ago #70407 by gizmo6023
Linuxcnc terminated with an error !! was created by gizmo6023
disregard

Please Log in to join the conversation.

More
10 years 8 months ago #70408 by BigJohnT
Replied by BigJohnT on topic Linuxcnc terminated with an error !!
Clear dmesg with sudo dmesg -c run linuxcnc save the output from dmesg to a text file like this dmesg > errors.txt then attach the text file to your message.

JT

Please Log in to join the conversation.

More
10 years 8 months ago #70409 by gizmo6023
Replied by gizmo6023 on topic Linuxcnc terminated with an error !!
...

Please Log in to join the conversation.

More
10 years 8 months ago #70419 by BigJohnT
Replied by BigJohnT on topic Linuxcnc terminated with an error !!
If you had followed my instructions you would have a text file...

JT

Please Log in to join the conversation.

Time to create page: 0.076 seconds
Powered by Kunena Forum