- Posts: 10
- Thank you received: 0
Ati Rage XL 8mb PCI video card.
- isladelobos
- Topic Author
- Offline
- New Member
-
Less
More
10 years 3 months ago #78154
by isladelobos
Ati Rage XL 8mb PCI video card. was created by isladelobos
Hi.
I have this video card but fails with this xserver or drivers.
lspci
05:06.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Rage XL (rev 27) (prog-if 00 [VGA controller])
The error is ever "out of range" "Frequency not supported" with two different screens.
What is the way to make it work?
Tnx.
I have this video card but fails with this xserver or drivers.
lspci
05:06.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Rage XL (rev 27) (prog-if 00 [VGA controller])
The error is ever "out of range" "Frequency not supported" with two different screens.
What is the way to make it work?
Tnx.
Please Log in to join the conversation.
- tommylight
-
- Away
- Administrator
-
Less
More
- Posts: 22010
- Thank you received: 3
10 years 3 months ago #78159
by tommylight
Replied by tommylight on topic Ati Rage XL 8mb PCI video card.
"out of range" "Frequency not supported" are monitor errors, not graphic card, you need a monitor that can do 48Hz, as it is the default frequency on old graphic cards.
You can also modify the xorg.conf to set the default at 60Hz, but it is hard to do without the monitor actually showing something.
If you are using Ubuntu 10.04, it tends to do that a lot on older hardware, so get wheezy iso and give it a try, chances are it will work.
Regards,
Tom
You can also modify the xorg.conf to set the default at 60Hz, but it is hard to do without the monitor actually showing something.
If you are using Ubuntu 10.04, it tends to do that a lot on older hardware, so get wheezy iso and give it a try, chances are it will work.
Regards,
Tom
Please Log in to join the conversation.
- isladelobos
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 10
- Thank you received: 0
10 years 2 months ago #78181
by isladelobos
Replied by isladelobos on topic Ati Rage XL 8mb PCI video card.
Finally i entered in recovery mode and created a new xorg.conf file in /etc/X11/ with the content:
Section "Device"
Identifier "ATI Technologies, Inc. Rage XL"
Driver "ati"
BusID "PCI:0:7:0"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 22.0 - 82.0
VertRefresh 60.0 - 76.0
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. Rage XL"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
EndSection
Now is working.
Section "Device"
Identifier "ATI Technologies, Inc. Rage XL"
Driver "ati"
BusID "PCI:0:7:0"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 22.0 - 82.0
VertRefresh 60.0 - 76.0
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. Rage XL"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
EndSection
Now is working.
Please Log in to join the conversation.
- isladelobos
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 10
- Thank you received: 0
10 years 2 months ago #78183
by isladelobos
Replied by isladelobos on topic Ati Rage XL 8mb PCI video card.
But this card not resolve my latency problems...
Now slower than the internal graphic card. (32mb)
Now slower than the internal graphic card. (32mb)
Please Log in to join the conversation.
Time to create page: 0.121 seconds
