Is There a Known Good Hardware List?

More
10 years 3 weeks ago #81415 by andypugh

Clive s wrote: I have this above but does the DOM require a driver as the linuxcnc iso does not see it a a drive ?


That's odd. Is it plugged in to a SATA port? In that case the system shouldn't even know that it isn't a HDD.

Does it show up in the BIOS screen?

Please Log in to join the conversation.

More
10 years 3 weeks ago #81416 by Clive S
Thanks for the rapid response Andy.
Yes it is plugged into a SATA port and does have 5V going to it. It does warm up so is getting power.
It is not shown in the bios. Perhaps it is faulty :(

The board runs fine with another SSD

Please Log in to join the conversation.

More
10 years 3 weeks ago #81420 by andypugh
If the BIOS can't see it, then I would suspect a fault.

Assuming that you are managing to boot from USB or similar, is there any sign of it in /dev/ ?

Please Log in to join the conversation.

More
10 years 3 weeks ago #81425 by Clive S

andypugh wrote: If the BIOS can't see it, then I would suspect a fault.

Assuming that you are managing to boot from USB or similar, is there any sign of it in /dev/ ?

I have booted from my SSD and there is no sign of it in /dev So I will try and send it back.

Thanks for the info.

Please Log in to join the conversation.

More
10 years 3 weeks ago #81439 by tommylight
sudo fdisk -l
there it will show all drives even if not formatted or not functional.
If it does not show there, send it back

Please Log in to join the conversation.

More
10 years 3 weeks ago #81452 by Clive S

tommylight wrote: sudo fdisk -l
there it will show all drives even if not formatted or not functional.
If it does not show there, send it back

It does not show up with the above so I will have to try and get it replaced. Thanks

Please Log in to join the conversation.

Time to create page: 0.126 seconds
Powered by Kunena Forum