XFCE's Standard Dock is Suboptimal for Touchscreens

(If you don't believe me, try to read every post from the last week)

I can vouch for that as I do in fact read every post from the recent topic list and just doing that involves over an hour a day.

But I have learnt a lot by doing it. Thanks to all the guys and dolls answering the questions:cheer:

BrendaEM wrote: In my CNC machine, I have old stepper motors, which use special code, which might rarely ever be needed in LinuxCNC. I realize that at some point the very code my machine runs on likely should be removed for the advancement of LinuxCNC. In the same way, I don't think that LinuxCNC should remain optimized for large 4:3 monitors.

I stand by my assertion that XFCE's standard dock is wasteful of screen area, and as a default it should be changed so it can be used better with modern monitors.

I implore those who stand against something that may help new LinuxCNC users acclimate, to try moving the icons to other command bar, shut off the dock, use LinuxCNC for a while, and then switch back.

As previously stated

tecno wrote: I am just a piano player but have to ask, are you for real?

So.......you aren't actually using Linuxcnc on your machine (I give up) ?

Ozzyrob, could you please recast your sentence and redo your post, so people might know what you are referring to, or with whom you are conversing with?