- Posts: 422
- Thank you received: 0
No eBay APP ID and/or Cert ID defined in Kunena configuration
Please recommend PCI-E Parallel Port card
6 years 1 month ago #181414
by spicer
No eBay APP ID and/or Cert ID defined in Kunena configurationReplied by spicer on topic Please recommend PCI-E Parallel Port card
But the thread title is "Please recommend PCI-E Parallel Port card" and not 6i25
Please Log in to join the conversation.
- Todd Zuercher
- Offline
- Platinum Member
-
Less
More
- Posts: 4739
- Thank you received: 2
6 years 1 month ago #181696
by Todd Zuercher
No eBay APP ID and/or Cert ID defined in Kunena configurationReplied by Todd Zuercher on topic Please recommend PCI-E Parallel Port card
I don't think the price difference is even that much. A duel parallel pcie card is more like 1/2-1/3 the cost of a 6i25.
I'm using this card to run a machine
www.newegg.com/p/0J2-000D-00023
But I did have some issues with pull up resistors on some cheap bobs with it.
I'm using this card to run a machine
www.newegg.com/p/0J2-000D-00023
But I did have some issues with pull up resistors on some cheap bobs with it.
Please Log in to join the conversation.
6 years 1 month ago #182389
by Bari
No eBay APP ID and/or Cert ID defined in Kunena configurationReplied by Bari on topic Please recommend PCI-E Parallel Port card
Not sure why this LPT card issue keeps coming up, but just about any LPT/parallel port card will work for software stepping as long as the motherboard has low enough latency.
The only time the EPP mode is necessary is when a LPT/parallel port card is used with a Mesa 7i43 FPGA card with a parallel port.
The only time the EPP mode is necessary is when a LPT/parallel port card is used with a Mesa 7i43 FPGA card with a parallel port.
Please Log in to join the conversation.
Time to create page: 0.041 seconds
