Hi,
Trying to make a control panel with Arduino based on the code for
Arduino based USB Pendant for Linuxcnc
I think i having some trouble with the connection to linuxcnc.
Trying to use this code for a Emco 120 control panel but i cant get it to work, using the original serialcon file and have checked that i have the right port, also added the necessary code in the postgui.hal file
Code:
loadusr -W serialcon
net Xposition halui.axis.0.pos-relative serialcon.xposition
net Yposition halui.axis.1.pos-relative serialcon.yposition
net Zposition halui.axis.2.pos-relative serialcon.zposition
Have removed the lcd code from it and done so i can send the commands via the serialmonitor.
I have also made so i can see the x y position in the serial monitor so i know it works from linuxcnc to the Arduino
I can see the serialcon pins in the Hal configuration.
Can someone help me to see whats wrong.
In the serial monitor i try to send ..
"D" Estop on/off
"9" Machine on/off
"7" Home all
..and so on, but nothing happens.
Adding the arduino and original serialcon.comp file
