A good Barebones PC for real time LinuxCNC

More
6 years 3 months ago #174746 by tommylight
Replied by tommylight on topic A good Barebones PC for real time LinuxCNC
This is much shorter and you can also choose between master and 2.8.
There is also a ready made ISO with everything included and ready to run 2.8.
forum.linuxcnc.org/9-installing-linuxcnc...nd-easy-installation

Please Log in to join the conversation.

More
6 years 3 months ago #174813 by RotarySMP
Replied by RotarySMP on topic A good Barebones PC for real time LinuxCNC
Interesting that we both had freeze problems under Debian but not under mint. A shame, as I prefer the debian interface, and it seems to have less overhead.

Please Log in to join the conversation.

More
6 years 3 months ago #174814 by tommylight
Replied by tommylight on topic A good Barebones PC for real time LinuxCNC
You can use Mint with XFCE, it is quite a bit lighter on resources.

Please Log in to join the conversation.

More
6 years 3 months ago #174815 by RotarySMP
Replied by RotarySMP on topic A good Barebones PC for real time LinuxCNC
Good idea. How do I swap?
Edit... Googled it.

Please Log in to join the conversation.

Time to create page: 0.153 seconds
Powered by Kunena Forum