This is a good PC for linuxcnc

More
6 years 6 months ago #165435 by emcPT
This is a good PC for linuxcnc was created by emcPT
Hello. Most of the topic are asking about hardware so here it is a good PC:

Motherboard:
MSI H310M PRO VDH
8Gb RAM
SSD
Intel(R) Pentium(R) Gold G5600 CPU @ 3.90GHz

Can run linuxcnc and a windows virtual machine.
Solid and functional

Please Log in to join the conversation.

More
6 years 6 months ago #165440 by tommylight
Replied by tommylight on topic This is a good PC for linuxcnc
Very nice latency, thank you.

Please Log in to join the conversation.

More
6 years 6 months ago #165450 by JohnnyCNC
Replied by JohnnyCNC on topic This is a good PC for linuxcnc
Does it allow for legacy boot or CSM mode UEFI?

Please Log in to join the conversation.

More
6 years 6 months ago #165526 by bbsr_5a
Replied by bbsr_5a on topic This is a good PC for linuxcnc
what happens to the latency if you stick on a usb Flash memory stick

Please Log in to join the conversation.

Time to create page: 0.129 seconds
Powered by Kunena Forum