Probably coincidental, but as I was installing memtest on the computer, with the mill active and homed but not running anything, LinuxCNC got this error:
Code:
hm2/hm2_7i76e.0: error finishing read! iter=18471737
hm2/hm2_7i76e.0: error finishing read! iter=18471737
Unexpected realtime delay on task 0 with period 1000000
This Message will only display once per session.
Run the Latency Test and resolve before continuing.
Unexpected realtime delay on task 0 with period 1000000
This Message will only display once per session.
Run the Latency Test and resolve before continuing.
I've installed tons of stuff with LinuxCNC running before and never ran into that (on Debian 9, though).
Anyway, that's got me worried. I vaguely recall running a latency test when I was first getting started with LinuxCNC.
I'll try the other things you suggest. I already re-seated everything.
Computer is a fairly cheap thing I built myself a couple years ago from stuff I bought at Fry's. Hardwired Ethernet (no Wi-Fi), nVidia GT710 graphics, 8 GB RAM.
Code:
# dmidecode -t 2
# dmidecode 3.2
Getting SMBIOS data from sysfs.
SMBIOS 3.1.1 present.
Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
Manufacturer: Gigabyte Technology Co., Ltd.
Product Name: Z370N WIFI-CF
Version: x.x
Serial Number: Default string
Asset Tag: Default string
Features:
Board is a hosting board
Board is replaceable
Location In Chassis: Default string
Chassis Handle: 0x0003
Type: Motherboard
Contained Object Handles: 0
Graphics:
Code:
01:00.0 VGA compatible controller: NVIDIA Corporation GK208B [GeForce GT 710] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Micro-Star International Co., Ltd. [MSI] GK208B [GeForce GT 710]
Flags: bus master, fast devsel, latency 0, IRQ 136
Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
Memory at e8000000 (64-bit, prefetchable) [size=128M]
Memory at f0000000 (64-bit, prefetchable) [size=32M]
I/O ports at e000 [size=128]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nouveau
Kernel modules: nouveau
Disk:
Code:
# smartctl /dev/nvme0 -a
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.19.0-12-rt-amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Number: Patriot Scorch M2
Serial Number: CD8E0787049E92033077
Firmware Version: E8FM11.5
PCI Vendor/Subsystem ID: 0x1987
IEEE OUI Identifier: 0x6479a7
Total NVM Capacity: 128,035,676,160 [128 GB]
Unallocated NVM Capacity: 0
Controller ID: 0
Number of Namespaces: 1
Namespace 1 Size/Capacity: 128,035,676,160 [128 GB]
Namespace 1 Formatted LBA Size: 512
Namespace 1 IEEE EUI-64: 6479a7 0b74628135
Local Time is: Fri Nov 13 21:48:24 2020 PST
Firmware Updates (0x02): 1 Slot
Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test
Optional NVM Commands (0x001e): Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat
Maximum Data Transfer Size: 512 Pages
Warning Comp. Temp. Threshold: 90 Celsius
Critical Comp. Temp. Threshold: 94 Celsius
Supported Power States
St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat
0 + 3.00W - - 0 0 0 0 0 0
1 + 2.00W - - 1 1 1 1 0 0
2 + 2.00W - - 2 2 2 2 0 0
3 - 0.1000W - - 3 3 3 3 1000 1000
4 - 0.0050W - - 4 4 4 4 400000 90000
Supported LBA Sizes (NSID 0x1)
Id Fmt Data Metadt Rel_Perf
0 + 512 0 1
1 - 4096 0 0
=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART/Health Information (NVMe Log 0x02, NSID 0xffffffff)
Critical Warning: 0x00
Temperature: 45 Celsius
Available Spare: 100%
Available Spare Threshold: 50%
Percentage Used: 0%
Data Units Read: 194,187 [99.4 GB]
Data Units Written: 2,251,423 [1.15 TB]
Host Read Commands: 4,660,555
Host Write Commands: 5,156,882
Controller Busy Time: 58
Power Cycles: 99
Power On Hours: 2,391
Unsafe Shutdowns: 45
Media and Data Integrity Errors: 0
Error Information Log Entries: 1
Warning Comp. Temperature Time: 0
Critical Comp. Temperature Time: 0
Temperature Sensor 2: 45 Celsius
Error Information (NVMe Log 0x01, max 16 entries)
Num ErrCount SQId CmdId Status PELoc LBA NSID VS
0 1 0 0x000c 0x021b - 2147483776 0 -
