Parallell Port PCI & PCIe Add In Card Info Thread

garage:~ $ sudo dmesg -C garage:~ $ sudo modprobe parport_pc io-0xdc00 irq=10 garage:~ $ sudo dmesg garage:~ $ ~/linuxcnc-dev/scripts/linuxcnc ~/linuxcnc/configs/mill/mill.ini LINUXCNC - 2.9.0~pre0 Machine configuration directory is '/home/phill/linuxcnc/configs/mill' Machine configuration file is 'mill.ini.expanded' Starting LinuxCNC... Found file(REL): ./mill.hal Waiting for component 'trivkins' to become ready.......Waited 3 seconds for master. giving up. .Note: Using POSIX realtime config string 'dc00 out' Linux parallel port @56320 not found

rmurphy@thinkPad-t530:~$ sudo modprobe parport_pc io=0xdc00 rmurphy@thinkPad-t530:~$ dmesg [43175.578001] parport 0xdc00 (WARNING): CTR: wrote 0x0c, read 0xff [43175.578005] parport 0xdc00 (WARNING): DATA: wrote 0xaa, read 0xff [43175.578006] parport 0xdc00: You gave this address, but there is probably no parallel port there! [43175.578015] parport0: PC-style at 0xdc00, irq -20544 [PCSPP,TRISTATE] [43175.578018] parport0: irq -20544 in use, resorting to polled operation rmurphy@thinkPad-t530:~$ linuxcnc LINUXCNC - 2.8.1 Machine configuration directory is '/home/rmurphy/linuxcnc/configs/by_interface.parport.stepper-1' Machine configuration file is 'stepper_mm.ini' Starting LinuxCNC... Found file(lib): /usr/share/linuxcnc/hallib/core_stepper.hal Note: Using POSIX realtime Found file(REL): ./standard_pinout.hal config string '0xdc00' open(/dev/parport0): No such file or directory hal_parport: rtapi_app_main: No such file or directory (-2) ./standard_pinout.hal:5: waitpid failed /usr/bin/rtapi_app hal_parport ./standard_pinout.hal:5: /usr/bin/rtapi_app exited without becoming ready ./standard_pinout.hal:5: insmod for hal_parport failed, returned -1 Shutting down and cleaning up LinuxCNC... Note: Using POSIX realtime LinuxCNC terminated with an error. You can find more information in the log: /home/rmurphy/linuxcnc_debug.txt and /home/rmurphy/linuxcnc_print.txt as well as in the output of the shell command 'dmesg' and in the terminal rmurphy@thinkPad-t530:~$ sudo modprobe ppdev rmurphy@thinkPad-t530:~$ linuxcnc LINUXCNC - 2.8.1 Machine configuration directory is '/home/rmurphy/linuxcnc/configs/by_interface.parport.stepper-1' Machine configuration file is 'stepper_mm.ini' Starting LinuxCNC... Found file(lib): /usr/share/linuxcnc/hallib/core_stepper.hal Note: Using POSIX realtime Found file(REL): ./standard_pinout.hal config string '0xdc00' note: MAXV max: 30.480 units/sec 1828.800 units/min note: LJOG max: 30.480 units/sec 1828.800 units/min note: LJOG default: 0.424 units/sec 25.440 units/min note: jog_order='XYZ' note: jog_invert=set([]) Shutting down and cleaning up LinuxCNC... task: 596 cycles, min=0.000061, max=0.023330, avg=0.009850, 0 latency excursions (> 10x expected cycle time of 0.010000s) Note: Using POSIX realtime rmurphy@thinkPad-t530:~$ linuxcnc LINUXCNC - 2.8.1 Machine configuration directory is '/home/rmurphy/linuxcnc/configs/by_interface.parport.stepper-1' Machine configuration file is 'stepper_mm.ini' Starting LinuxCNC... Found file(lib): /usr/share/linuxcnc/hallib/core_stepper.hal Note: Using POSIX realtime Found file(REL): ./standard_pinout.hal config string '0' note: MAXV max: 30.480 units/sec 1828.800 units/min note: LJOG max: 30.480 units/sec 1828.800 units/min note: LJOG default: 0.424 units/sec 25.440 units/min note: jog_order='XYZ' note: jog_invert=set([]) Shutting down and cleaning up LinuxCNC... task: 426 cycles, min=0.000046, max=0.018297, avg=0.009764, 0 latency excursions (> 10x expected cycle time of 0.010000s) Note: Using POSIX realtime rmurphy@thinkPad-t530:~$

sudo dmesg -C sudo modprobe parport_pc io=0xdc00 irq=10 sudo dmesg ls /dev/parport* sudo modprobe ppdev ls /dev/parport*

garage:~ $ sudo dmesg -C garage:~ $ sudo modprobe parport_pc io=0xdc00 irq=10 garage:~ $ sudo dmesg garage:~ $ ls /dev/parport* ls: cannot access '/dev/parport*': No such file or directory garage:~ $ sudo modprobe ppdev garage:~ $ sudo dmesg garage:~ $ ls /dev/parport* ls: cannot access '/dev/parport*': No such file or directory garage:~ $

garage:~ $ sudo dmesg -C garage:~ $ sudo modprobe parport_pc io=0xdc00 garage:~ $ dmesg garage:~ $