XHC WHB04B-6 - lost RF warning

More
4 years 10 months ago #230162 by mittim
XHC WHB04B-6 - lost RF warning was created by mittim
Hi,


when connecting my new WIRED XHC WHB04B-6 to linuxcnc i get this message on the display:
 

Attachment not found




Has anyone had the same issue?

Thanks in advance!

Please Log in to join the conversation.

More
4 years 10 months ago #230169 by tommylight
Replied by tommylight on topic XHC WHB04B-6 - lost RF warning
Lost RF = lost radio frequency
the wireless connection is lost, so i do not thin it is a LinuxCNC issue.

Please Log in to join the conversation.

More
4 years 8 months ago #233988 by mittim
Replied by mittim on topic XHC WHB04B-6 - lost RF warning
I think this is an issue with the wired USB connection. The controller is being listed as "Bus 001 Device 007: ID 10ce:eb93 Silicon Labs".

When I plug the controller into USB Port with WIN10 it is being recognized and does not show "lost rf".

Please Log in to join the conversation.

More
2 years 9 months ago #289460 by ewarner77
Replied by ewarner77 on topic XHC WHB04B-6 - lost RF warning
I am seeing the same thing on a wired pendant that I'm desperately trying to get running on a Tormach...  any more information available???

Please Log in to join the conversation.

More
5 months 1 week ago #346454 by cstorksen
Replied by cstorksen on topic XHC WHB04B-6 - lost RF warning
Hi,

I am having the same problem, with the same controller , only 4 axis . Same id, and same symptoms. I am running linuxCNC 2.9.8, I have tried to change the ID in the .rules file, but no luck.
Did anyone resolve this, any suggestions?

Please Log in to join the conversation.

Time to create page: 0.086 seconds
Powered by Kunena Forum