Ehternet motion card

More
4 years 2 months ago #249331 by CNC123
Replied by CNC123 on topic Ehternet motion card
Ok

, chcem ešte vedieť, čo je lepšie Mesa 7i96s alebo Mesa 7i76e

Počul som, že Mesa 7i96s sa nekamaráti s vretenom
A tá Mesa 7i76e, že jej to ide lepšie

Kde je pravda?
Čo je lepšie??

Please Log in to join the conversation.

More
4 years 2 months ago #249333 by tommylight
Replied by tommylight on topic Ehternet motion card
Mesa 7i76E.
Alebo Mesa 7i95 kdys peneze nejsou problem.
7i95 ma vhodi pro encoderi na vsehny axi.
7i76E ma vic vyhodi/vhodi.

Please Log in to join the conversation.

More
4 years 2 months ago #249334 by CNC123
Replied by CNC123 on topic Ehternet motion card
But i doesnt need encorder no?

Or i wrong?

Please Log in to join the conversation.

More
4 years 2 months ago #249335 by tommylight
Replied by tommylight on topic Ehternet motion card
Ne potrebuju encodery, vsehny funguju bez encodery.

Please Log in to join the conversation.

More
4 years 2 weeks ago #254222 by CNC123
Replied by CNC123 on topic Ehternet motion card
So Mesa 7i96E will be best for linuxcnc and spindle and nor with anything else???


YES???

Please Log in to join the conversation.

More
4 years 2 weeks ago #254225 by andypugh
Replied by andypugh on topic Ehternet motion card
If you need step/dir control then yes.

Please Log in to join the conversation.

More
4 years 4 days ago #255200 by CNC123
Replied by CNC123 on topic Ehternet motion card
i need it for steppers motors

Please Log in to join the conversation.

More
3 years 9 months ago #261168 by CNC123
Replied by CNC123 on topic Ehternet motion card
So Mesa 7i76e what kind linux will by running best?

Please Log in to join the conversation.

More
3 years 9 months ago #261170 by tommylight
Replied by tommylight on topic Ehternet motion card
Official 2.8.4 release from the downloads page.
www.linuxcnc.org/downloads

Please Log in to join the conversation.

More
3 years 9 months ago #261173 by CNC123
Replied by CNC123 on topic Ehternet motion card
Thank you
Linuxcnc 2.8.4 will by support mesa 7i76e?

Please Log in to join the conversation.

Time to create page: 3.081 seconds
Powered by Kunena Forum