Remora for RP2040

Hey Scott, about adding the encoders. The RP2040 W5500 firmware is similar to the STM32 W5500 firmware, in the sense that they both use the pingpong buffer thing. Ive been trying to add encoders/PWM to that firmware, but Im encountering an issue. I dont know where to send the data. There are examples for digital in/out and stepgen stuff, but there is no examples for PV/SP modules. Where ever its going, it should be similar for both firmwares.

Here is my initial attempt at encoders, but I cannot yet get it to compile
github.com/cakeslob/Remora-STM32F4xx-W55.../Src/modules/encoder

Here is what Drew and I were working on for PWM, it compiles, but doesnt yet work either.
github.com/cakeslob/Remora-STM32F4xx-W55...main/Src/modules/pwm

I was wondering if you could give me a few pointers? (pun intended)
But seriously, where do we send the data for PV/SP? The pointers are different than the other versions of remora, and I am stuck.

For the RP2040 Andrew implemented the double buffers and methods to get the current buffer.

this->rxData = getCurrentRxBuffer(&rxPingPongBuffer);
this->txData = getCurrentTxBuffer(&txPingPongBuffer);

I'm waiting on stock of the RP2340 to arrive so I can get another new toy. It looks like the RP1 is getting more and more popular and with the version of the RP2340 with more IO would allow for even more functionality.

Might be a good excuse to learn the PIO stuff and port over the other Remora modules. At the time I did the RP2040 it was suitcase project while I was travelling for work.

I have found an example of communication between RPi5 (RP1) and RP2040 over SPI:  rpi5-rp1-spi . Perhaps it can be useful?

Hello everyone, can someone send an example of a PWM spindle configuration with feedback? HAL file and config.txt for loading into rp 2040

The software Remora PWM module would need to be ported over to the RP2040 firmware. Or better still, a hardware version developed.

are you going to do it? or some problem and it is not possible? i tried to understand the original firmware cat but it seems to be too complicated for me...

linuxgizmos.com/updated-wiznet-reveals-n...ernet-functionality/

Raspberry Pi RP2350 and the fully hardwired TCP/IP controller W5500 enhancing the capabilities of the traditional Raspberry Pi Pico2 board with additional Ethernet functionality via W5500

Bari wrote:

linuxgizmos.com/updated-wiznet-reveals-n...ernet-functionality/

Raspberry Pi RP2350 and the fully hardwired TCP/IP controller W5500 enhancing the capabilities of the traditional Raspberry Pi Pico2 board with additional Ethernet functionality via W5500

Thanks, just ordered one with GoFundMe contributions.

hello scotta and thank you for your amazing work
i got my rp 2040 working with remora and its amazing 
it works with axis and qtdragon 
my question now is how to get it to work with qtplasmac, i cant get it to work even though i copied all the necessary config lines in both hal and ini files from my par port configs
can anyone help me with this
Thanks in advance

I've neve used qtplasmac but can you describe what is / is not happening as expected?