Redesigned human-computer interaction interface

More
2 years 11 months ago #286148 by MakerYang
Redesigned human-computer interaction interface was created by MakerYang
I have rewritten a set of human-machine interaction interfaces (GUI UI) for LinuxCNC, supporting Windows, Mac, and Linux. The UI part is basically completed. Next, I will design a motion control board.

Attachment not found


Attachment not found


Attachment not found


Attachment not found


Attachment not found


Attachment not found


Attachment not found

Please Log in to join the conversation.

More
2 years 11 months ago #286150 by MakerYang
Replied by MakerYang on topic Redesigned human-computer interaction interface
This project is open source, and the source code repository can be found at: github.com/armcnc

Please Log in to join the conversation.

More
2 years 11 months ago #286780 by onceloved
Replied by onceloved on topic Redesigned human-computer interaction interface
加油

Please Log in to join the conversation.

More
2 years 11 months ago #286781 by onceloved
Replied by onceloved on topic Redesigned human-computer interaction interface
有兴趣加QQ群吗251676794

Please Log in to join the conversation.

Time to create page: 0.086 seconds
Powered by Kunena Forum