ld-linux-armhf.so.3 with Rpi 2.9.2 iso?

rdtsc
Topic Author
Offline
Senior Member

2 years 5 months ago #299769 by rdtsc

ld-linux-armhf.so.3 with Rpi 2.9.2 iso? was created by rdtsc

Trying to run a piece of software from 2019 on the latest Rpi .iso Debian Bookworm. It complains of "cannot execute: required file not found" (missing library.) The file was built for

Code:

ELF 32-bit LSB executable, ARM, EABI5 version 1 (SYSV), dynamically linked, interpreter /lib/ld-linux-armhf.so.3, for GNU/Linux 3.2.0.

Checking, only /lib/ld-linux-aarch64.so.1 is available. On a whim and as a total hack, tried

Code:

sudo ln -s /lib/aarch64-linux-gnu/ld-linux-aarch64.so.1 /lib/ld-linux-armhf.so.3

but this resulted in "Accessing a corrupted shared library."

Is there some way I can get the ld-linux.so.3 onto this Rpi without totally borking something?

Please Log in to join the conversation.

elovalvo
Offline
Elite Member

2 years 5 months ago #299904 by elovalvo

Replied by elovalvo on topic ld-linux-armhf.so.3 with Rpi 2.9.2 iso?

I think there are incompatibility issues between the 32-bit version (armhf) and the 64-bit version (aarch64)

Please Log in to join the conversation.

rdtsc
Topic Author
Offline
Senior Member

2 years 5 months ago #300090 by rdtsc

Replied by rdtsc on topic ld-linux-armhf.so.3 with Rpi 2.9.2 iso?

Software vendor to the rescue; they were able to recompile it for aarch64, thank goodness.

Please Log in to join the conversation.

Time to create page: 0.076 seconds