NVEM V5 LINUXCNC REMORA FIRMWARE[SOLVED]

Hi all,
I received this board and wanted to insert the remora firmware via segger jtag v8, but I can't find a guide for my model. Where can I find it?
Thanks
 
 
 
 
 

forum.linuxcnc.org/18-computer/44828-rem...-cnc-board?start=380
I found something here, it's not easy to follow so many different cards and so many different topics in a discussion, it's even hard to find them!

 
 
 
 

I tried to figure out if I see something with pyOCD but I don't understand if I'm using jlink/stlink or links wrong....

Solved but I don't know what I DID to unblock the problem, faulty connection pins or next install of rt1052 sdk toll software???
My ST-Link V2 dont have DAP firmware!

Hello, friend. First of all, congratulations on successfully using NVEM V5 on linuxcnc.
I have the same control card as yours, but I read scotta's reply and read the 230 pages, but still can't find a solution, and I don't see a complete process. Can I ask for your help?

Hi DarkPhoinix,

Could you please describe the steps you have used to successfully flash remora as i'm having issues connecting to target using j-link.

Many thanks
archie