interpreter on EMC

BMG wrote:

I think VIncent is looking for this link

wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Ins..._the_source_with_git

thank you, BMG! I really appreciate your help, but something boring puts off my EMC study. maybe I have to stop and pick it up some days later~

BigJohnT wrote:

Nurbs is only on the 2.4 development version. New things are not usually added to a released version.

John

HI, John, I wrote a letter to you, have you received it?

BMG wrote:

I think VIncent is looking for this link

wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Ins..._the_source_with_git

BMG, I got something confusing. As you know, a simplified NURBS has already been intergrated in EMC(although dev version), and Xemet made his work possible. But I wonder if there is a new command for this new function, like G0,G1 etc. or we should find a new vacant command for this, like G5.2 or something else? And I still do not understand if my emc2.3.3 is suitable for the nurbs patch? and how can I install this patch?

BigJohnT wrote:

Nurbs is only on the 2.4 development version. New things are not usually added to a released version.

John

John, wiki.linuxcnc.org/uploads/Leto_art837759.pdf this file is not available, can I find this file somewhere else? or could you do me a favour to send me a copy??

I don't have a copy of it sorry.

John

cmorley wrote:

I believe the development version of EMC has some NURBS functionality added, But beyond that I don't know.
look here:
wiki.linuxcnc.org/cgi-bin/emcinfo.pl?NURBS

cmorley, can you tell me how to patch my emc with this patch file, rvb file and the butterfly.3dm???