Probing Gcode error help

More
14 years 8 months ago #18151 by cwebs
Probing Gcode error help was created by cwebs
I got this corner probe code from the internet and can,t find the error. It says, near line two, "Bad character '173' used" I can't seem to find it. Can anyone help? Thanks, Carl

Attachment Corner_Probe.txt not found

Please Log in to join the conversation.

More
14 years 8 months ago #18153 by BigJohnT
Replied by BigJohnT on topic Re:Probing Gcode error help
The file is a word processor file so it contains zillions of unwanted junk characters in it.

John

Please Log in to join the conversation.

More
14 years 8 months ago #18154 by BigJohnT
Replied by BigJohnT on topic Re:Probing Gcode error help
linuxcnc.org/index.php/english/component...ew&catid=40&id=17821

John

Please Log in to join the conversation.

More
14 years 8 months ago #18158 by cwebs
Replied by cwebs on topic Re:Probing Gcode error help
That must be why I got the same error on all his files. Carl

Please Log in to join the conversation.

More
14 years 8 months ago #18163 by phillc54
Replied by phillc54 on topic Re:Probing Gcode error help
It opens in WordPad.

Cheers, Phill

Attachment Corner_Probe_Converted.txt not found

Please Log in to join the conversation.

More
14 years 8 months ago #18170 by Rick G
Replied by Rick G on topic Re:Probing Gcode error help
I use gedit for working on subs.

You need to be careful what editor you use as it may add extra characters for formating, style, line feeds, etc. LinuxCNC will not like that.

Rick G

Please Log in to join the conversation.

Time to create page: 0.088 seconds
Powered by Kunena Forum