EMC2 problem...

So could my problem be that I tried a -.25 Y axis movement, with my Y axis table travel set for 0 to 8?

shotgunn

Yes, if you were at Y0.24 or less and issued a G0 Y-0.25 and your soft limit is set to 0-8 that would give you the warning.

John

I tried to do a .25 Y axis movement as well (instead of -.25) that didn't work either. That was last night, I might have, weeeeeelllllll, um, actually I don't think that I thought to change the table travel to -whatever to +positive whatever.

I'll try it as soon as I get home.

Thanx,

shotgunn

problem solved!!!

Thanx a million!!!

shotgunn