G64 Path Blending Not Working As Expected

More
13 years 5 months ago #34728 by evokanevo
G64 Path Blending Not Working As Expected was created by evokanevo
I run the following gcode and get this path. What surprises me is that the leadin (left side) deviation from the path is greater than the leadout (right side). I would expect it to be symmetrical.
Code:
G64 P5.0 Q1.0 G0 x[0.000000] y[60.000000] z[30.000000] a[0.000000] G1 x[0.000000] y[60.000000] z[0.000000] a[0.000000] F20000 G1 x[90.000000] y[60.000000] z[0.000000] a[0.000000] F20000 G1 x[90.000000] y[60.000000] z[30.000000] a[0.000000] F20000

Attachment not found

Please Log in to join the conversation.

More
13 years 5 months ago #34729 by skunkworks
Replied by skunkworks on topic G64 Path Blending Not Working As Expected
Your gcode in your screen shot doesn't match what you posted :)

Could you post the whole gcode program?

sam

Please Log in to join the conversation.

More
13 years 5 months ago #34731 by evokanevo
Replied by evokanevo on topic G64 Path Blending Not Working As Expected
It does match. The o-code (line N20) gets translated into exactly the gcode posted. Look at the move XYZA coordinates and the end position shown in the window.

Also, I verified by creating a separate file with just the gcode I posted and ran that alone - identical results.

Please Log in to join the conversation.

More
13 years 5 months ago #34737 by evokanevo
Replied by evokanevo on topic SOLVED: G64 Path Blending Not Working As Expected
This behavior is due to the Z-acceleration being lower than the XY-acceleration.

Please Log in to join the conversation.

Time to create page: 0.076 seconds
Powered by Kunena Forum