[SOLVED] Requested tool not found in tooltable

Hello,

I want to open a drill file of PCBGCODE (an ULP for EAGLE to generate Gcode from the PCB's) but I got this error:

Requested tool 5 not found in tooltable.

I add the tool in the tooltable with number 5, save it and reopened it again.
But I got the same error.

Somebody who can help?
The file for engraving the PCB works properly...


minitreintje

you'll need to add a tool no 6 also as your gcode shows T6 so to cover everything make a dummy tool table to cover T7 also
that hopefully should do it .

Thanks! I will try it.


minitreintje

note the tool table list required as in the gcode file T1 through to T6

( T01 | 3.302mm 0.1300in | 0.0000in | 0.0000in | 0 )
( T02 | 0.610mm 0.0240in | 0.0000in | 0.0000in | 0 )
( T03 | 0.813mm 0.0320in | 0.0000in | 0.0000in | 0 )
( T04 | 1.016mm 0.0400in | 0.0000in | 0.0000in | 0 )
( T05 | 1.118mm 0.0440in | 0.0000in | 0.0000in | 0 )
( T06 | 1.194mm 0.0470in | 0.0000in | 0.0000in | 0 )