problem G85 and R plane with G98

when G85 is programed whit G98 code .

for example

G0G90X0Y0Z20
G98 G85 R1 Z-10. F10
G80M30

max speed dont´t work ( R plane to Z plane)

edugonza2008 wrote: when G85 is programed whit G98 code .
G0G90X0Y0Z20
G98 G85 R1 Z-10. F10
max speed dont´t work ( R plane to Z plane)

It has always worked for me.
Which version of LinuxCNC are you using?

Can you describe in words what you expect,and what actually happens?

Hi.

I am Using 2.5.2

For example !!

G81 . OK
G82 . OK
G83 . OK
G85 . don't work max speed (R plane to Z plane)
G86. OK

thank !!!

edugonza2008 wrote: G85 . don't work max speed (R plane to Z plane) !

www.linuxcnc.org/docs/html/gcode/gcode.h...:G85-Boring-Feed-Out

Doesn't mention a rapid from R to Z. I agree that you might expect one, and www.helmancnc.com/fanuc-g85-boring-cycle-cnc-mill-programming/ says that Fanuc has a rapid (in G98 mode)

I will mention it on the developers list. It is annoying. (though it does perform as-documented)

thank You !!!.

All G81-G82-G83-G85-G86 ...... should work in the same way in G98 mode. (the movement between R plane and Z plane should be at max speed)

Thank for your reply !!!

I think I fixed this.
I just pushed it to master. If you need it then you can get a version with the fix from buildbot.linuxnc.org at the expense of running on the development ("master") branch.